What are the types of machine tool protective covers?

The machine tool is usually in operation, and the machine tool protective cover has to protect it, so the interval is very small. When using it, it is necessary to prevent the metal pin from flying out and injuring people or affecting the processing environment. It is also necessary to prevent the coolant from being thrown out with the spindle and the tool from falling off and injuring people. Do not use brute force to pull or close it during use.

The machine tool protective cover also has many functions, which is why many customers will install protective covers on machine tools. It can be divided into three points.

1. It can be used to protect the lead screw, light bar, column, spindle and other circular rotating cylinders. It can be used horizontally or vertically.

2. The machine tool protective cover is used to protect the machine tool guide rails. It can protect the internal hard guide rails, linear guide rails and ball screws or transmission racks of the machine tool from external corrosion and damage.

3. There are many types of machine tool protective covers to meet various requirements.

Machine tool protective cover is also called guide rail protective cover. Protective cover is generally divided into two types: steel plate protective cover and accordion protective cover. Steel plate protective cover. Steel plate or stainless steel plate is used to form a steel telescopic protective cover. The protective cover is a traditional form of protection for machine tools. It is widely used in this field and plays an effective protective role in preventing the entry of chips and other sharp objects. Through certain structural measures and suitable scraper plates, it can also effectively reduce the penetration of coolant. It can adapt to the increasing requirements of modern machine tools for high technology, correct installation position, high operating speed, etc.

Accordion protective cover, factory direct sales, using imported material dust cover, more than 20 types of materials, high-quality PVC frame, heat-bonded, good elasticity, dustproof, oil-proof, fire-proof, flame-retardant, its advantages compared with steel plate protective cover, long stroke, small compression, length ratio of 1:10, its main body is lighter, more beautiful in appearance, it has become the main component to protect the machine tool guide rail, and has been widely used in engraving machines, milling machines, elevators, grinders, drilling machines, etc.

Flexible accordion protective cover is a product series that can be combined arbitrarily, and its raw materials, appearance, processing methods and sizes can be determined according to actual conditions.

One of its basic components is that each fold has a PVC frame that supports and stabilizes it. This frame can be closely connected to the external folding material through different processing methods. According to different working environments, the accordion machine protective cover has different methods. For example, when there are more iron filings, the accordion protective cover can also be upgraded to an armor-type accordion protective cover. In short, adding a layer of armor on the surface of the cover can more effectively protect the rail and extend the life of the cover.